welcome to visit shenzhen city of haixinda nameplate limited company's official website!
Service Hotline
News
What equipment is needed for the production of stainless steel signs
Release time:
2022-01-12 15:27
Source:
Stainless steel signs are more and more widely used in our lives, so I think we should also know what is stainless steel signs, so do you know what equipment you need to use when making stainless steel signs:
Color machine: mainly used for metal corrosion signs of electrophoretic filling process. Any sign that needs to be etched, whether it is Yangwen or Yinwen, has a common feature, that is, the part that needs to be raised on the sign must have a layer of anti-corrosion protective layer, while the metal substrate in the area without protective layer is exposed and will be recessed after etching. On the sign, any sunken area must be filled with a certain color of paint to achieve the purpose of decoration and protection. In the past, the process of filling paint on etched signs was very cumbersome. Only after filling or spraying, the paint layer on the redundant parts was removed. The work efficiency was low, which directly affected the process cost of etched signs.
Etching machine: etching machine can be divided into two types of chemical etching machine and electrolytic etching machine. In chemical etching, a chemical solution is used to achieve the purpose of etching through a chemical reaction. Chemical etching machine is a technology that removes materials by chemical reaction or physical impact.
Cutting machine: divided into flame cutting machine, plasma cutting machine, laser cutting machine, water cutting, etc. The laser cutting machine is the fastest in efficiency, the highest in cutting accuracy, and the cutting thickness is generally small. The cutting speed of the plasma cutting machine is also very fast, and the cutting surface has a certain slope. Flame cutting machine for the thickness of the larger carbon steel material.
What equipment is needed for the production of stainless steel signs will be introduced here first. In fact, there are still many equipment needed for the production of stainless steel signs. The above mentioned are the main equipment. If you are interested in the knowledge, you can pay more attention to our official website. We will update the contents of the website from time to time.
Next Page
Next Page
Innovation and progress in the signage and precision hardware industry
In the current manufacturing environment, the production and processing enterprises specializing in the production of various types of signs, LOGO and precision hardware are showing strong innovation and sustainable development momentum. These companies continuously improve product quality and production efficiency by introducing advanced technology, optimizing production processes, and strengthening R & D team building to meet the diverse needs of the market.
2024
05-10
Bronze Craft and Signage Purpose
According to the standard size of the bronze plate, the thickness of the copper plate material required by the iterative selection table is selected. Then the standard cutting size is taken out and cut on the plate shearing machine, and the frame is folded on the folding machine. After the plate is folded and shaped, take less xylene solution (which can also be replaced by gasoline) and pour it on the surface of the copper plate, and wipe it repeatedly with clean fine gauze until the dirt on the surface layer of the tung plate is removed and the brightness is bright. Finally, the surface of the copper plate is placed on a grinding wheel machine to polish the surface as a whole.
2024
05-10
Stainless steel signs are divided into several types
In all the sign printing process, metal sign printing is the most difficult, but also the most process, if it is other types of signs in the printing process, just the use of printing can be, can silk screen, or thermal transfer, that can complete the work, but the metal sign is different, because of its unique material, before printing, but also through a series of processing.
2024
05-10
Photochemical Treatment of Aluminum Extruded Radiator and How to See Double Teeth
The aluminum extrusion radiator will form a layer of illegal oxide on the surface of one piece when degreasing, light-holding, alkali clock and texture clock. This layer of oxide is only a layer of loose tissue attached to the surface of one piece, which must be removed by pickling. The pickling referred to here does not require mat etching of the aluminum profile matrix, but only needs to dissolve the insoluble oxides on the surface of the workpiece.
2024
05-10
In order to meet the production demand in 2022 and in the future, the company decided to relocate part of its production lines to Baokezhen Industrial Park. This decision is to further expand the company's scale and influence, improve production efficiency and quality, and create better work for employees Environment and development opportunities.
2022
07-14